D1-SINC Blue control unit: cable reel complete with converter and transmitter: I
Inclinometer data are processed through a housed electronic card
directly into the cable reel. Data conversion is 24 bit. This technology allows you to have an instrument with 1/20000 sen(α) precision at affordable prices. The data is sent to a PC via serial port or Bluetooth. The electronics are mounted on a cable reel. The connection cable is graduated with a metal ring every 50 cm and is protected by a high-resistance sheath.
The D1-SINC Blue transmission control unit is removable and can be mounted on cables
different length.
Witness probe: it is a probe with mechanical characteristics similar to the inclinometric probe, but without sensors. It allows you to check the accessibility of the inclinometer tube. It comes with a cable graduated every meter.
GHIBLI-D software: It can be installed on a PC with a Windows operating system and allows you to acquire the data of the test carried out on two or four guides, with or without statistical control. It allows you to choose the desired sampling interval and the depth of the survey. Continuously displays inclinometer readings, depth and probe temperature. Records data with each operator command. It is also possible to correct and repeat a measurement already performed, after repositioning the probe. The program calculates the average of the check-sums of the readings and the standard deviation. Displays the internal battery voltage. It provides, for each test, a file in CSV format compatible with EXCEL already headed with all the synthetic parameters of the test.
Cable block for wellhead: The purpose of this accessory is to create a support point and a stop for the struts that graduate the cable. The use of the cable lock allows you to position yourself precisely at the right depth in order to have perfectly comparable readings. The support point of the cembra is made of brass.
G1-SINC M V probe:
The G1-SINC M V probe is built with the same mechanics as the servo-accelerometer probe with the difference that the sensitive element is a latest generation MEMS sensor. The probe body is made of AISI 316 stainless steel.
The relatively large diameter wheels allow greater stability of the probe during travel and easier overcoming of any obstacles that may be along the guides. This solution also allows greater stability of the trolley in the case of stresses orthogonal to the rotation axis and therefore better precision of the Y sensor readings. The G1-SINC M V probe adapts well to inclinometric tubes of various diameters, from the more classic 79 mm up to less than 49 mm. The data acquisition software is very intuitive and the communication between the probe and the PC is managed by the Bluetooth control unit which eliminates the problem of connection cables (connection via USB is also possible).
