Double receiver seismocone
Double receiver seismocone
Product category:
G1-CONE 2S dual receiver seismic piezocone that allows you to perform seismic testing for the calculation of VS30 using the true interval method.
DAC.0001
If you need further information on this product, fill out and send the form below. We will contact you as soon as possible. Thank you
G1-CONE 2S dual receiver seismic piezocone.
The instrument allows you to perform the seismic test for calculating the VS30 using the true interval method.
Equipped with two seismic receivers placed 1 meter apart.
The measured delay allows us to calculate the speed of the S waves in the soil layer between the two accelerometers.
Can be used with D1-CPLS Blue acquisition control units.
The image above shows the arrival of two wave trains generated by two energizations producing S waves (shear waves). It is well noted that the first wave train is detected at depths of approximately 4 and 5 meters while the second hits the receivers at approximately 9 and 10 m. Already from this first processing we can appreciate the interval generated by the 1 m thick ground between the two receivers.
The instrument allows you to perform the seismic test for calculating the VS30 using the true interval method.
Equipped with two seismic receivers placed 1 meter apart.
The measured delay allows us to calculate the speed of the S waves in the soil layer between the two accelerometers.
Can be used with D1-CPLS Blue acquisition control units.
The image above shows the arrival of two wave trains generated by two energizations producing S waves (shear waves). It is well noted that the first wave train is detected at depths of approximately 4 and 5 meters while the second hits the receivers at approximately 9 and 10 m. Already from this first processing we can appreciate the interval generated by the 1 m thick ground between the two receivers.
